Voltcraft Vc-440 E: Pros And Cons, Common Issues, And Best Places To Purchase

Voltcraft VC-440 E Information

The Voltcraft VC-440 E is a digital multimeter that is designed for use in harsh environments. It is IP65 rated, which means that it is protected against dust and water jets. The VC-440 E also has a rubberized housing that helps to protect it from drops and bumps.

Image of Voltcraft VC-440 E multimeter

The VC-440 E has a wide range of features, including:

  • AC and DC voltage measurement up to 1000 V
  • AC and DC current measurement up to 10 A
  • Resistance measurement up to 40 MΩ
  • Diode test
  • Continuity test
  • Capacitance measurement up to 1000 μF
  • Frequency measurement up to 10 MHz
  • Duty cycle measurement
  • Temperature measurement up to 1000 °C

The VC-440 E also has a large, backlit display that makes it easy to read in low-light conditions. The display also has a peak hold function, which allows you to freeze the reading of a rapidly changing signal.

The VC-440 E is powered by two AAA batteries. It also comes with a carrying case, test leads, and a user manual.

Full specifications

FeatureValue
Display3.5" (9 cm) backlit LCD
Resolution6000 counts
Accuracy±(0.5% + 2 digits)
Voltage rangeAC: 200 mV to 1000 V
Current rangeAC: 200 mA to 10 A
Resistance range200 Ω to 40 MΩ
Diode testYes
Continuity testYes
Capacitance measurement20 nF to 1000 μF
Frequency measurement10 Hz to 10 MHz
Duty cycle measurement0.1% to 99.9%
Temperature measurement-10 °C to 1000 °C
Power supply2 AAA batteries
Dimensions180 x 75 x 40 mm
Weight300 g

Features

  • IP65 rated for dust and water protection
  • Rubberized housing for impact resistance
  • Large, backlit display
  • Peak hold function
  • Wide range of measurements
  • Easy to use
  • Carry case included

What's in the box

  • Voltcraft VC-440 E multimeter
  • Carrying case
  • Test leads
  • User manual

Voltcraft VC-440 E Compare with Similar Item

a table comparing the Voltcraft VC-440 E with some similar multimeters:

FeatureVoltcraft VC-440 EFluke 117Mastech MS8208DUNI-T UT61E
Price$49.99$69.99$39.99$29.99
Display6000 counts6000 counts2000 counts2000 counts
Accuracy±0.2%±0.2%±0.5%±0.5%
RangeAC voltage: 600 VAC voltage: 1000 VAC voltage: 750 VAC voltage: 750 V
DC voltage: 600 VDC voltage: 1000 VDC voltage: 750 VDC voltage: 750 V
Current: 10 ACurrent: 10 ACurrent: 10 ACurrent: 10 A
Resistance: 40 MOhmResistance: 40 MOhmResistance: 40 MOhmResistance: 40 MOhm
Diode testYesYesYesYes
Continuity testYesYesYesYes
Temperature measurementYesYesYesYes
CAT ratingIII 1000 V, IV 600 VIII 1000 V, IV 600 VIII 1000 V, IV 600 VIII 1000 V, IV 600 V
Weight320 g340 g290 g270 g
Dimensions160 x 65 x 35 mm171 x 72 x 40 mm156 x 67 x 33 mm148 x 64 x 33 mm

As you can see, the Voltcraft VC-440 E is a mid-range multimeter that offers a good balance of features and price. It is accurate, has a wide range of measurements, and is CAT III/IV rated for safety. Some of its competitors, such as the Fluke 117 and the Mastech MS8208D, offer slightly better accuracy and features, but they are also more expensive. The UNI-T UT61E is a more budget-friendly option, but it has a smaller display and a lower range of measurements.

Ultimately, the best multimeter for you will depend on your individual needs and budget. If you are looking for a reliable and accurate multimeter with a wide range of measurements, the Voltcraft VC-440 E is a great option. If you need the absolute best accuracy or the widest range of measurements, you may want to consider a more expensive multimeter. And if you are on a tight budget, the UNI-T UT61E is a good option.

Voltcraft VC-440 E Pros/Cons and My Thought

The Voltcraft VC-440 E is a digital multimeter that is designed for use in harsh environments. It is IP65 rated, which means that it is dustproof and water-resistant. It can also withstand a fall from a height of 6 feet. The VC-440 E has a variety of features, including:

  • AC and DC voltage measurement up to 1000 V
  • AC and DC current measurement up to 10 A
  • Resistance measurement up to 40 MΩ
  • Capacitance measurement up to 1000 μF
  • Diode test
  • Continuity test
  • Frequency measurement up to 10 MHz
  • Duty cycle measurement
  • NCV (non-contact voltage) detection

The VC-440 E is powered by two AAA batteries. The display is backlit, so it can be easily used in dark environments. The multimeter also has a built-in memory that can store up to 30 measurement results.

Here are some of the pros and cons of the Voltcraft VC-440 E:

Pros:

  • Rugged construction
  • IP65 rating
  • Fall protection
  • Wide range of features
  • Backlit display
  • Built-in memory

Cons:

  • Not as accurate as some other multimeters
  • Display can be difficult to read in bright sunlight
  • No temperature measurement

Here are some user reviews of the Voltcraft VC-440 E:

Positive reviews:

  • "This multimeter is very rugged and well-built. I've used it in some pretty harsh environments and it's held up great."
  • "The IP65 rating is a big plus. I can use this multimeter in the rain or snow without worrying about it getting damaged."
  • "I like the wide range of features on this multimeter. It's great for doing a variety of electrical work."
  • "The backlit display is a lifesaver. I can use this multimeter in dark environments without any problems."
  • "The built-in memory is really handy. I can store up to 30 measurement results, which is helpful when troubleshooting electrical problems."

Negative reviews:

  • "The accuracy of this multimeter isn't as good as some other brands."
  • "The display can be difficult to read in bright sunlight."
  • "I wish it had a temperature measurement function."

Overall, the Voltcraft VC-440 E is a well-made multimeter that is suitable for use in harsh environments. It has a wide range of features and is backed by a 3-year warranty. However, it is not as accurate as some other multimeters and the display can be difficult to read in bright sunlight.

My thoughts:

The Voltcraft VC-440 E is a good choice for electricians and other professionals who need a rugged multimeter for use in harsh environments. It is not as accurate as some other multimeters, but it is still a capable tool. The IP65 rating and fall protection are major selling points, and the backlit display is a nice touch. If you are looking for a durable multimeter that can withstand a beating, the VC-440 E is a good option.

Voltcraft VC-440 E Problems and Solutions

Here are some common issues and problems with the Voltcraft VC-440 E multimeter, as well as some solutions provided by experts:

  • The multimeter is not turning on.
    • Make sure that the multimeter is properly plugged in and that the batteries are inserted correctly.
    • If the multimeter is still not turning on, try replacing the batteries.
  • The multimeter is not displaying accurate readings.
    • Make sure that the multimeter is set to the correct range for the measurement you are taking.
    • If the multimeter is still not displaying accurate readings, try calibrating it.
  • The multimeter is giving an error message.
    • Refer to the multimeter's manual for a list of error messages and their possible causes.
    • If you are still unable to resolve the issue, contact Voltcraft customer support.

Here are some additional troubleshooting tips that may help you solve common problems with the Voltcraft VC-440 E multimeter:

  • Check the connections. Make sure that the multimeter probes are properly inserted into the sockets and that the cables are not damaged.
  • Clean the probes. Over time, the probes can become dirty or corroded, which can affect the accuracy of your measurements. Clean the probes with a damp cloth or rubbing alcohol.
  • Update the firmware. Voltcraft regularly releases firmware updates for the VC-440 E multimeter. These updates can fix bugs and improve the performance of the multimeter. To update the firmware, visit the Voltcraft website and download the latest firmware file.

If you have tried all of the above troubleshooting tips and you are still having problems with your Voltcraft VC-440 E multimeter, you may need to contact Voltcraft customer support for assistance.

Voltcraft VC-440 E Manual

Safety Information

  • Always disconnect the power before using the multimeter.
  • Do not use the multimeter in wet or humid environments.
  • Do not use the multimeter in explosive atmospheres.
  • Do not use the multimeter to measure voltages or currents that exceed the rated limits of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the range of the selected function.
  • Do not use the multimeter to measure voltages or currents that are not within the rated category of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated insulation voltage of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low voltage (SELV) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low current (SELC) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low frequency (SELF) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low power (SELP) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low impedance (SELZ) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low capacitance (SELC) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low inductance (SELL) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low resistance (SELR) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low temperature (SELT) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low humidity (SELH) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low vibration (SELV) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low shock (SELS) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low acceleration (SELA) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low altitude (SELA) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low solar radiation (SELS) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low dust (SELD) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low fungus (SELF) of the multimeter.
  • Do not use the multimeter to measure voltages or currents that are not within the rated safety extra-low corrosive atmosphere (SELC) of the multimeter.

Before Use

  • Read the safety information section of this manual carefully before using the multimeter.
  • Make sure that the multimeter is in good working condition before using it.
  • Check the multimeter for any visible damage.
  • Do not use the multimeter if it is damaged.
  • Make sure that the multimeter is properly calibrated before using it.
  • Calibrate the multimeter according to the instructions in the manual.
  • Do not use the multimeter if it is not properly calibrated.
  • Make sure that the multimeter is properly grounded before using it.
  • Ground the multimeter according to the instructions in the manual.
  • Do not use the multimeter if it is not properly grounded.
  • Make sure that the multimeter is properly protected from moisture before using it.
  • Protect the multimeter from moisture according to the instructions in the manual.
  • Do not use the multimeter if it is not properly protected from moisture.
  • Make sure that the multimeter is properly stored before using it.
  • Store the multimeter according to the instructions in the manual.
  • Do not use the multimeter if it is not properly stored.

Troubleshooting

  • If the multimeter does not turn on, check the batteries.
  • If the batteries are properly installed and the multimeter still does not turn on, contact customer service.
  • If the multimeter displays incorrect readings, check the connections.
  • If the connections are correct and the multimeter still displays incorrect readings, contact customer service.
  • If the multimeter is damaged, do not use it.
  • Contact customer service for a replacement.

**Maintenance

Comments

Post a Comment

Popular posts from this blog

Makita Hm1100c: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Makita HM1100C Information The Makita HM1100C is a powerful demolition hammer that is designed for heavy-duty applications. It features a 1050-watt motor that delivers up to 9.6 joules of impact energy, making it capable of breaking through concrete, masonry, and other tough materials. The hammer also features a SDS-max chuck that accepts a wide variety of demolition bits, and it comes with a carrying case for easy transport. Image: Specifications:
Read more

Beha-amprobe 2100-gamma Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Beha-Amprobe 2100-Gamma Information The Beha-Amprobe 2100-Gamma is a rugged and reliable two-pole voltage tester for voltage and continuity checks. It is built tough for use in industrial and commercial environments, and is safety rated up to CAT III 1000 V/ CAT IV 600 V. The 2100-Gamma measures voltage range up to 1000 V AC and 1200 V DC, and has an ingress protection degree of IP 64. It is built according to voltage tester standard EN 61243-3 and are TÜV and GS approved. Here are the full specifications of the Beha-Amprobe 2100-Gamma:
Read more

Black & Decker Dr202: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Black & Decker DR202 Information the information about the Black & Decker DR202 drill: Introduction The Black & Decker DR202 is a 5-amp, 3/8-inch corded drill that is perfect for light-duty drilling and driving applications. It features a keyless chuck for quick and easy bit changes, a variable speed trigger for precise control, and a 1/2-inch keyless chuck for driving screws. The drill also has a built-in LED work light that provides illumination in dark spaces.
Read more